Power input:                 12 / 24v DC

Power consumption:  0.7 amps maximum @ 12vdc

System Weight:           1.05 kg 

Control unit:                 170 (h) x 105 (w) x 60 (d) mm

Transducer:                  65 (h)  x 85 (w) mm   
                                        (including mounting ring)

Transducer cable:    4m

Waterproofing:         Transducer, cables, connectors - IP68

Cables:                   IP68; Oil and Fire resistant

Power input:                 12 / 24v DC

Power consumption:  1.1 amps maximum @ 12vdc

System Weight:            1.85 kg

Control unit:                 170 (h) x 105 (w)  x 60 (d) mm

Transducer:                  65 (h) x 85 (w) mm   
                                        (including mounting ring)

Transducer cables:   4m & 8m

Waterproofing:         Transducer, cables, connectors - IP68

Cables:                   IP68; Oil and Fire resistant

The AC Modules enable an Ultra Series II Powerboat or Sail Ultrasonic System to operate as a Dual voltage system.  Powered from both the Mains supply (AC 100 - 240v) and the vessel's 12 - 32 volt DC supply.   It is supplied with the AC Module which plugs directly into the Ultra 10 control unit.  Two power input cables connect to the vessels AC and DC supplies allowing the module to control the power supplies switching automatically between AC and DC.  The system will use the AC supply when available.

AC voltage:  110/230v AC (50 - 60hz) auto sensing.
Power consumption: 
   - AC Module 10 for use with Ultra 10 systems:  15 Watts
   - AC Module 20 for use with Ultra 20 systems:  20 Watts    

The DC power input and consumption figures are the same according to the Ultra systems above.